Industrial Wastewater TreatmentWe design and build various Industrial Wastewater Treatment applications:

  • Wash down Bays
  • Workshops Inc compliance reports
  • Refuelling stations – Specializing in Class 1 Oil separators – 5ppm
  • Construction site run off protection
  • Liquid waste Transformer bunding as per EPA standards
  • Service stations-Specializing in Class 1 Oil separators – 5ppm
  • Gross pollutant traps

Our 30 years experience has enabled us to work on various projects throughout that time. This ensures you have an experienced team through out the process.

We also have mechanical, hydraulic and electrical engineers that promptly respond and ensure that your design is accurate and efficient.

Our Industrial Wastewater Treatment systems are designed to be user friendly and have minimal ongoing costs.

How GPS Environmental can help your operations

We can provide assistance with all Council & Tradewaste approvals, taking the worrying out of sometimes confusing process. This allows you to spend more time on the project itself.

Always having most of our stock available, this allows us to dispatch most equipment in 24 Hours and we are fully insured. All our specialised Custom designs/orders can take a slightly longer time depending on the size of the unit required. We have ready to go skid mounted systems, this allows for faster deliver and install at your end.

GPS Environmental ensures after sales support is a high priority. Our experience technicians will be available for any enquiries you may have. – including servicing and repairs.

END-TO-END PROCESS

Step 1

Designing the product plan

Our professional, experienced and friendly staff will meet you on site at a time that suits you. They will help by discussing all your needs and offer you different options that will suit you and your budget. We are happy to travel if required.

Step 2

Creating your project design

We provide an initial design to assist you with more clarification on your project. This includes the correct flow rates, to ensure you have the correct size system, to and to ensure that your budget is taken into account. Once you are happy, we provide full hydraulic engineered drawings, necessary paper work to assist with all Tradewaste and Council approvals.

Step 3

Manufacturing your system

We begin building your wastewater treatment system. All our equipment comes professionally pack and transported to your allocated destination.

Step 4

Installation

Once we arrive on site, we commence installing the system using qualified trained staff. We test and commission the entire system. We then train your staff on the system running procedure, maintenance and breakdown sourcing. Ensure your running costs are minimal.

What to do with your wastewater

  • Oil separators are installed prior to discharge, to treat the wash down bay water.
  • Discharging to sewer is commonly used, check your local trade waste guidelines.
  • If discharge to the Environment is necessary. An upgrade to an EPA compliant system will be designed. This requires much better filtration and higher grade discharge levels.
  • If you wash down area is not or unable to be roofed a first flush diversion system to divert rainwater to be installed.
  • Enter into a maintenance agreement for servicing of your water treatment equipment in accordance with Council or EPA regulations. This is a detailed process by a licenced technician. Not just pumped out. Which is not classed as a service.
  • Only use biodegradable quick break degreasers and detergents. This assists with Hydrocarbon separation prior to the oil separator treatment.
  • Use only helical rotor (i.e. Mono) or diaphragm pumps to pump waste water to the oil separator. Submersible pumps etc will cause emulsification. Which is binding the oil and water together. This is extremely difficult to reverse, with out the use of costly equipment.

What not to do with your wastewater

  • Do not use traditional solvent based degreasers that do not have quick break properties. These degreasers cause oil and detergents to remain in suspension and not separate through a traditional oil water separator system.
  • Do not dispose of any coolants, acids, caustics or chemicals through the water treatment system, these should be disposed of by licenced contractors.
  • Do not allow wash down water to discharge directly to the storm water drain/environment.
  • Do not allow storm water to enter the wash bay bunded area.
  • Do not allow workshops or other areas discharge water to your water treatment system area.
  • Do not adjust or modify any treatment equipment without prior approval from the manufacturer.
Environmentally committed

Environmentally committed

Being an Environmental wastewater company, protecting the Environment and our customers are our main priority. We have seen and worked with all the major environmental changes over the past 30 years.

Some of our key factors are:

  1. Product Recycling
  2. Product construction materials
  3. Water recycling
  4. Water usage
  5. Power consumption
  6. Environmental friendly washing products

Industry experience and expertise

From our continuous committed operations, we have grown into a Independent market leader in the wastewater industry. This compliments our committed experience and ongoing customer referrals. We are fully licensed and insured.

All our staff, contractors and engineers are fully trained in our products, designs, safety, government regulations and customer service commitment.

We also assist with:

  1. Servicing
  2. Breakdown
  3. Repairs
  4. Onsite reports for workshop water and storm water compliancy.
  5. Council & Tradewaste approvals
  6. All applicable engineered drawings
  7. Shed supply and construct
  8. Concreting. Small to Commercial

Local knowledge

All our products, equipment and designs are local authority compliant by  having worked in various Australian locations, giving us an extensive knowledge in many industries and governing bodies.

Enquire about Industrial Wastewater Treatment

We can find a solution to meet your needs.

Contact Us